Development of Modeling Algorithm of the Characteristics of the Steels in the Subsystem of Management of the Production Resources of Steel Production

The article is devoted to the development of an algorithm for modeling the characteristics of steels in accordance with customer requirements. A mathematical model is presented that takes into account the optimal levels of the main factors and their interaction, providing the required values of the characteristics. The next step in the study of the mathematical model was modeling by means of functional modeling methodology IDEF0. Input and output data, as well as normative documents of model management and mechanisms of this management for building a functional model are defined. The control mechanism was the software product OptimalSostav, developed using the object-oriented programming language Delphi. The software product is designed to simulate the characteristics of steels using the specified limits of permissible minimum and maximum values of mechanical properties. The algorithm of realization of the control mechanism, which is based on the fractional factor analysis, is described. The presented algorithm allows to identify the influence of chemical composition on the mechanical properties of steels in the form of mathematical and graphical dependencies and to determine the specified mechanical properties that meet the requirements of the customer. The main possibilities and the scope of the software product, which allows to solve the problem of predicting the optimal chemical composition, providing the required mechanical characteristics, as well as to adjust the process of steel melting within a given chemical composition to achieve the desired set of properties. The application of the software product on the example of the analysis of the influence of chemical elements on the mechanical properties of 75HMF roll steel is shown. The results of modeling in the form of mathematical and graphic dependences are given and the estimation of efficiency of application of the software product is given. The results of solving the problem of approximation of the obtained graphic dependences of the influence of chemical elements on the mechanical properties of the studied steel grade by means of Microsoft Excel are presented. It is established that the developed mathematical and algorithmic software of the software product allows to study the percentage of chemical elements in relation to the total composition of the alloy, based on the obtained pie charts and dependency graphs. The adequacy of the model is confirmed by experimental results.

modeling algorithm, steel, required characteristics, mathematical modeling, software product

1. Kabulova E. G. Estestvennye i Tekhnicheskie Nauki, 2015, no. 4 (82), pp. 198—200 (in Russian).

2. Shestakova E. N., Potapov A. I., Orlov G. A. Materials of the international conference dedicated to the memory of corresponding member of RAS, honorary doctor of UrFU V. L. Kolmogorov "Innovative technologies in metallurgy and mechanical engineering, Ekaterinburg, Publishing house of Uralskii federalnyi universitet imeni Prezidenta Rossii B N Eltsina, 2014, pp. 483—486 (in Russian).

3. Kuznetsov L. A., Korneev A. M., Zhuravleva M. G. Problems of management, 2007, no. 1, pp. 46—50 (in Russian).

4. Kuznetsov L. A., Zhuravleva M. G., Vishnyakov D. U. Electrotechnical complexes and control systems, 2008, no. 3, pp. 50—53 (in Russian).

5. Kuznetsov L. A., Chernykh M. V. News of higher education institutions. Ferrous metallurgy, 2007, no. 11, pp. 61—65 (in Russian).

6. Kozak L. Y. Computer Research and Modeling, 2017, vol. 9, no. 2, pp. 187—199.

7. Friedenson M. E., Sokolkin B. P. et al. Stal, 1977, no. 1, pp. 82—84 (in Russian).

8. Kochkovskaya S. S. Metal Science and Heat Treatment, 2015, vol. 57, no. 1, pp. 87—90.

9. Kochkovskaya S. S., Serdyuk A. I. Avtomatizatsiia v Promyshlennosti, 2 017, no. 8, pp. 54—56 (in Russian).

10. Agekyan T. A. Fundamentals of error theory for astronomers and physicists, Moscow, Nauka, 1972, 170 p. (in Russian).

11. Kochkovskaya S. S., Serdyuk A. I. Modeling of chemical composition of roll steel grades by means of the software of OptimalSostav, Theses of reports of the 76th international scientific and technical conference "Current problems of modern science, the equipment and education", Magnitogorsk, Publishing house of Magnitogorsk gos tekhn un-ta im G I Nosova, 2018, vol. 1, pp. 260—261 (in Russian).

12. Kochkovskaya S. S. Proceedings of the III International scientific and practical conference "Mechatronics, automation and robotics", Novokuznetsk, SIC MS, 2019, no. 3, pp. 82—84 (in Russian).

13. Rozhkov I. M., Vlasov S. A., Mulk G. N. Mathematical model for choice of rational technologies and quality control of steel, Moscow, Metallurgiia, 1990, pp. 184 (in Russian).

14. Kochkovskaya S. S., Serdyuk A. I. Calculation of optimum mechanical properties in relation to the percentage of the alloying elements of roll steel grades "OptimalSostav", Svidetelstvo ob ofitsialnoi registratsii programmy dlia EVM, no. 2018613600, Rospatent, 2018 (in Russian).