Specific Features and Opportunities of Employment of the Network Technologies in the Educational Process and Scientific Research for Training of Engineers of Various Levels

This paper presents the most important principles and features of construction and operation of the interuniversity scientific and educational network. This network is created for training of engineers in the field of automation, robotics and mechatronic systems. There were four main components of the distance education realized in the network. 1. Lectures in special disciplines were delivered by the leading professors, special educational materials in the form of electronic resources (in several languages) were used for the lectures. These electronic resources contained many demonstration examples illustrating implementation of the studied theoretical material in practice. 2. The laboratory classes in these disciplines were done with a remote use of the laboratory facilities available to all the network participants. 3. The remote education in the project design is based on the results already received during implementation of real scientific and commercial projects (including for industrial application). These projects were realized during the Russian federal target programs and grants (Russian Scientific Foundation and Russian Foundation for Basic Research). 4. Various production practices related to the laboratory and industrial equipment available in the Universities, which participated in the network, were provided. Also the paper contains certain features of the software and hardware implementation for the remote work with the laboratory and industrial equipment in the network. Several examples are presented of the laboratory work and project design done by the students remotely participating in the network.

межуниверситетская научно-образовательная сеть, инженерное образование, автоматизация производства, робототехника, мехатроника, interuniversity scientific and educational network, engineering education, production automation, robotics, mechatronics

1. Пряничников В. Е., Биелич Т., Вицан Д., Каталинич Б., Кирсанов К. Б., Кувшинов С. В., Марзанов Ю. С., Подураев Ю. В., Хелемендик Р. В., Прысев Е. А., Углешик А., Харин К. В. Разработка образовательных технологий и сети ассоциированных лабораторий-роботариумов // Информационно-измерительные и управляющие системы. 2015. Т. 13. С. 7-25.

2. Pryanichnikov V. E., Filaretov V. F. Autonomous Mobile University Robot AMUR: Technology and Application to Extreme Robotics // Procedia Engineering. 2015. Vol. 100. P. 269-277.

3. Pryanichnikov V. E., Andreev V. P., Prysev E. A. Group control of mobile robots, based on the net-technologies // Proc. of the Int. Conference on Robotics for Security & Space (Planet & Earth rovers). St. Peterburg: Poliectnika service. 2010. Р. 279-283.

4. Filaretov V., Yukhimets D. The method of formation of AUV smooth trajectory in unknown environment // Proc. Of Int. Conf. OCEANS'2016. Shanghai, Chaina. 2016. Р. 1-8.

5. Filaretov V., Yukhimets D., Novitsky A. The Mobile Robot Navigation Method Based on Onboard Sensors and Camera Data Fusion // Pros. of the Int. Conf.on Computer Graphics, Visualization, Computer Vision and Image Processing. Madeira, Portugal. 2016. Р. 179-186.

6. Yukhimets D. Neuron Net for Forming Optimal Smooth Trajectories Based on Bezier Splines // Applied Mechanics and Materials. 2017. Vol. 865. Р. 442-449.

7. Филаретов В. Ф., Юхимец Д. А., Зуев А. В., Губанков А. С., Мурсалимов Э. Ш. Разработка метода совмещения трехмерных моделей обрабатываемых деталей с их CAD-моделями при наличии деформаций // Проблемы машиностроения и автоматизации. 2016. № 3. С. 60-69.

8. Филаретов В. Ф., Юхимец Д. А., Зуев А. В., Губанков А. С. Метод автоматической обработки гибких изделий сложной пространственной формы на основе информации, получаемой от систем технического зрения и их CAD-моделей // Автоматизация в промышленности. 2016. № 12. C. 53-58.

9. Filaretov V., Zuev A., Yukhimets D., Gubankov A., Mursalimov E. Method of combination of three-dimensional models of details with their CAD-models at the presence of deformations // Proc. of 12th IEEE Conf. on Automation Science and Engineering. Fort Worth, Texas, USA. 2016. P. 257-261.

10. Filaretov V., Zuev A., Gubankov A., Yukhimets D. A new approach to automatization of non-rigid parts machining at their deformation by using multilink manipulators with vision system // Proc. of the 2016 IEEE Intern. Conf. on Computer, Control, Informatics and its Applications. Jakarta, Indonesia. 2016. P. 227-232.

11. Filaretov V., Yukhimets D., Zuev A., Gubankov A., Mursali-mov E. The Automatization Method of Processing of Flexible Parts without their Rigid Fixation // Procedia Engineering. 2015. Vol. 100. P. 4-13.

12. Filaretov V. F., Gubankov A. S., Gornostaev I. V. The Formation of Motion Laws for Mechatronics Objects Along the Paths with the Desired Speed // Proc. of International Conference on Computer, Control, Informatics and Its Applications. Jakarta, Indonesia. 2016. P. 93-96.

13. Filaretov V. F., Gubankov A. S. Adaptive system forming extremely high speed of multilink manipulator gripper // Proc. of 23rd International DAAAM Symposium on Intelligent Manufacturing and Automation. Zadar, Croatia. 2012. Vol. 1. P. 473-476.