

On the Regulation of Oscillations of a Galloping-Based Wind Power Harvesting System
https://doi.org/10.17587/mau.24.46-56
Abstract
Currently, various possibilities for obtaining energy from renewable sources, in particular, flows of water or wind, are intensively investigated. The most widely used wind power harvesters are those where the working element rotates (a propeller or a vertical axis turbine, such as a Darrieus or Savonius rotor). However, the possibility of using the flow-induced oscillations of elastic structures in order to generate energy is now actively considered. One of the types of such oscillations is galloping, i.e. vibrations of bluff bodies in the direction perpendicular to the incident flow. The occurrence of galloping is due to the fact that aerodynamic forces acting on a bluff body, under certain conditions, create a negative damping. In this paper, we consider a mechanical system consisting of three bodies that can move in a direction perpendicular to the flow. One of these bodies is a square prism, and the other two are material points. The bodies are connected in series with each other and with a fixed support by linear elastic springs. A permanent magnet is rigidly connected to the prism. This magnet moves inside an induction coil. As a result, an electric current is generated in the electrical circuit connected to the coil. For such installations, on the one hand, it is required that galloping occurs at the lowest possible flow speed. On the other hand, at high flow speeds, it is necessary to reduce the amplitude of oscillations so that the device would not be damaged. The influence of the system parameters (in particular, the spring stiffness coefficients) on the stability of the equilibrium and on the characteristics of periodic solutions is studied. It is shown that by changing the stiffness of the springs, it is possible to significantly expand the range of flow speeds where the galloping occurs. The amplitudes of oscillations of bodies increase as the flow speed grows. In order to increase the limit flow speed, at which the amplitudes of oscillations start exceeding the maximum permissible value, a regulating algorithm is proposed. Within the framework of this algorithm, the displacement of one of mass points with respect to the prism is locked/unlocked depending on the current flow speed.
About the Author
Y. D. SelyutskiyRussian Federation
PhD., Leading Researcher
Moscow
References
1. Den Hartog J. P. Transmission Line Vibration Due to Sleet, Trans. AIEE, 1932, vol. 51, pp. 1074—1086.
2. Luo S. C., Chew Y. T., Ng Y. T. Hysteresis Phenomenon in the Galloping Oscillation of a Square Cylinder, J. Fluids & Struct., 2003, vol. 18, no. 1, pp. 103—118, doi: 10.1016/S0889-9746(03)00084-7.
3. Oka S., Ishihara T. Numerical Study of Aerodynamic Characteristics of a Square Prism in a Uniform Flow, J. Wind Eng. & Ind. Aerodyn., 2009, vol. 97, pp. 548—559, doi: 10.1016/j.jweia.2009.08.006.
4. Alonso G., Meseguer J., Sanz-Andres A., Valero E. On the galloping instability of two-dimensional bodies having elliptical cross sections, J. of Wind Engineering and Industrial Aerodynamics, 2010, vol. 98, pp. 438—448.
5. Lusin V. D., Ryabinin A. N. On the galloping of prisms in gas or fluid flow, Proceedings of the Krylov State Research Center, 2010, iss. 53 (337), pp. 79—84 (in Russian).
6. Parkinson G. V., Brooks N. P. H. On the Aeroelastic Instability of Bluff Cylinders, ASME. J. Appl. Mech., 1961, vol. 28, no. 2, pp. 252—258, doi: 10.1115/1.3641663.
7. Parkinson G. V., Smith J. D. The Square Prism as an Aeroelastic Non-Linear Oscillator, The Quarterly Journal of Mechanics and Applied Mathematics, 1964, vol. 17, no. 2, pp. 225—239, doi: 10.1093/qjmam/17.2.225
8. Bearman P. W., Gartshore I. S., Maull D. J., Parkinson G. V. Experiments on Flow-Induced Vibration of a Square- Section Cylinder, J. Fluids & Struct. 1987, vol. 1, no. 1, pp. 19—34, doi: 10.1016/s0889-9746(87)90158-7.
9. Sarioglu M., Akansu Y. E., Yavuz T. Flow Around a Rotatable Square Cylinder-Plate Body, AIAA Journal, 2006, vol. 44, no. 5, pp. 1065—1072, doi: 10.2514/1.18069
10. Alonso G., Meseguer J., Perez-Grande I. Galloping stability of triangular cross-sectional bodies: A systematic approach, J. Wind Engineering Industrial Aerodynamics, 2007, vol. 95, pp. 928—940
11. Gao G.-Z., Zhu L.-D. Nonlinear Mathematical Model of Unsteady Galloping Force on a Rectangular 2:1 Cylinder, J. Fluids and Struct., 2017, no. 70, pp. 47—71, doi: 10.1016/j.jfluidstructs.2017.01.013.
12. Deniz S., Staubli T. Oscillating Rectangular and Octagonal Profiles: Interaction of Leading- and Trailing-Edge Vortex Formation, J. Fluids & Struct., 1997, vol. 11, no. 1, pp. 3—31, doi:10.1006/jfls.1996.0065.
13. Abdel-Rohman M. Design of Tuned Mass Dampers for Suppression of Galloping in Tall Prismatic Structures, J. Sound & Vibr., 1994, vol. 171, no. 3, pp. 289—299, doi: 10.1006/jsvi.1994.1121
14. Gattulli V., Di Fabio F., Luongo A. Simple and Double Hopf Bifurcations in Aeroelastic Oscillators with Tuned Mass Dampers, J. Franklin Institute, 2001, vol. 338, pp. 187—201, doi: 10.1016/S0016-0032(00)00077-6
15. Selwanis M. M., Franzini G. R., Beguin C., Gosselin F. P. Wind Tunnel Demonstration of Galloping Mitigation with a Purely Nonlinear Energy Sink, J. Fluids & Struct., 2021, vol. 100, pp. 103169, doi: 10.1016/j.jfluidstructs.2020.103169
16. McCarthy J. M., Watkins S., Deivasigamani A., John S. J. Fluttering energy harvesters in the wind: A review, J. Sound & Vibr., 2016, vol. 361, pp. 355—377, doi: 10.1016/j.jsv.2015.09.043
17. Klimina L. Dynamics of a slider-crank wave-type wind turbine, Proceedings of the 14th IFToMM World Congress, 2015, pp. 582—588, doi: 10.6567/IFToMM.14TH.WC.OS13.007
18. Barrero-Gil A., Alonso G., Sanz-Andres A. Energy Harvesting from Transverse Galloping, J. Sound & Vibr., 2010, vol. 329, pp. 2873—2883, doi: 10.1016/J.JSV.2010.01.028
19. Dai H. L., Abdelkefi A., Javed U., Wang L. Modeling and Performance of Electromagnetic Energy Harvesting from Galloping Oscillations, Smart Mater. & Struct., 2015, vol. 24, no. 4, pp. 045012, doi: 10.1088/0964-1726/24/4/045012
20. Hemon P., Amandolese X., Andrianne T. Energy Harvesting from Galloping of Prisms: A Wind Tunnel Experiment, J. Fluids and Struct., 2017, vol. 70, pp. 390—402, doi: 10.1016/j.jfluidstructs.2017.02.006
21. Javed U., Abdelkefi A., Akhtar I. An Improved Stability Characterization for Aeroelastic Energy Harvesting Applications, Comm. in Nonlin. Sci. & Num. Simul., 2016, vol. 36, pp. 252—265, doi: 10.1016/j.cnsns.2015.12.001
22. Wang K. F., Wang B. L., Gao Y., Zhou J. Y. Nonlinear Analysis of Piezoelectric Wind Energy Harvesters with Different Geometrical Shapes, Arch. Appl. Mech., 2020, vol. 90, pp. 721—736, doi: 10.1007/s00419-019-01636-8
23. Vicente-Ludlam D., Barrero-Gil A., Velazquez A. Enhanced Mechanical Energy Extraction from Transverse Galloping Using a Dual Mass System, J. Sound & Vibr., 2015, vol. 339, pp. 290—303, doi: 10.1016/j.jsv.2014.11.034
24. Dosaev M. Interaction Between Internal and External Friction in Rotation of Vane with Viscous Filling, Appl. Math. Mod., 2019, vol. 68, pp. 21—28, doi: 10.1016/j.apm.2018.11.002
25. Aleksandrov A. Yu., Tikhonov A. A. Application of a PIDlike control to the problem of triaxial electrodynamic attitude stabilization of a satellite in the orbital frame, Aerosp. Sci. & Tech., 2022, vol. 127, p. 107720, doi: 10.1016/j.ast.2022.107720
Review
For citations:
Selyutskiy Y.D. On the Regulation of Oscillations of a Galloping-Based Wind Power Harvesting System. Mekhatronika, Avtomatizatsiya, Upravlenie. 2023;24(1):46-56. (In Russ.) https://doi.org/10.17587/mau.24.46-56